DIY: How to Fix Basic Plumbing Issues At Home

With the advent of technology, we as individuals have increasingly become self-sufficient. If there is an intent to learn, there is no problem which doesn’t have a solution on the internet. Today, we are here to address a problem that is widely experienced in every household — issues arising out of plumbing pipes and fittings. Leaking taps, leaking plumbing pipes and clogged drains among others are basic plumbing faults that you will experience at some point in your life. While the easier way out is to get your plumber to come and fix them, one can also manage quick fixes on these plumbing fittings oneself, or at least to stall the problem till your plumber can suggest a more permanent fix.

Leaking Taps and Pipes

Leaking Taps and Pipes Issue

Not just a constant nagging reminder, leaking faucets and plumbing pipes are a huge waste of water as well as an added cost to your water bill. It’s that plumbing problem which needs immediate attention. Traditional taps usually leak when their internal rubber or washer has expired, which implies it is time for a replacement. The ideal way to deal with it is to cease the water supply to the tank from the source, unscrew the tap’s head and detach it from the sink. You will locate the inner screws of the tap, which can then be loosened to reveal the old washer in the cavity. Now, replace this washer with a new one which is easily available at any hardware store. In case of a leaking pipe or a leaking plumbing fitting, check the joint and whether a simple tightening resolves the leak. If not, replacement is the only way out as this usually means your pipe is old, rusty or simply damaged.

Clogged Drains

Clogged Drains Issue

Besides raising a string of accusations within the family regarding who is responsible for it, clogged drains are an utter nuisance that can fortunately be dealt with using some quick DIY fixes! Whether it is a shower or a kitchen drain, pour a vinegar and baking soda solution to dissolve the grease, grime and other debris that is clogging your drain. Alternatively, pouring hot water into the drain can be followed by using a plumbing snake as a handy tool. A plumbing snake can be easily procured at your nearest hardware store and is very effective in unclogging drains.

Running Water in the Cistern

Often after one is done with their business, they spot the water in the toilet leaking after flushing. This phenomenal waste of water is also a super common problem, mostly occurring due to a bad flapper. The solution is to drain the flush tank and clean the flapper. You may find the flapper to be damaged, in which case it would have to be replaced. There are other internal parts of the tank like ballcock, refill tube, float or inlet valve. Any disruption in either of these parts could also be the reason behind the leak. Adjust or replace, whatever seems fit after a thorough examination.

Running Water in the Cistern Issue

While plumbing issues cannot be avoided completely, you can significantly minimise them by installing only quality plumbing pipes and fittings in your house. Vectus bath accessories range and Vectus pipes, both CPVC pipes and ASTM pipes (also known as uPVC pipes), are one of the finest quality plumbing pipes that offer a very long shelf life. Invest in plumbing pipes and fittings that are low on maintenance and high in quality and you’re all set for a hassle-free experience in your home.

Share

© All Rights Reserved Vectus
Powered by ITPL