Customer Care Number: 1800-202-6666 Mail Us at: info@vectus.in

Signs Your Plastic Water Tank Needs Immediate Replacement

The value of a plastic water tank is shown in its convenience for safe storage of water in home/office premises. After years, even good plastic water tanks can exhibit signs of damage. Neglecting these signs can result in the water being compromised and the tank needing replacement. To save yourself from serious plastic water tank replacement costs, being aware of these signs is crucial. Below is a list of noticeable signs to keep in mind. 

1. Clear Damages and Cracks

One of the more noticeable signs is the cracking of the surface of the plastic water tank. Cracks can start small due to the plastic being exposed to pressure or sunlight. Even small hairline cracks can result in water contamination, or leakage to deteriorate the water tank’s condition. 

2. Constant Water Leakage

Leaks that occur from the fittings or outlets can be repaired. However, leakages that occur from the body of the tank, especially from several spots, indicate that the strength of the plastic tank may be threatened. Leaking, coupled with the negative effects it poses, especially in the matter of water wastage, can cause damages to the walls, roof, or the area around the tank. At this level, any form of repair will be required.

3. Discoloration and Putrid Water

The tank must not change the color, taste, or smell of the stored water. If the water is yellow, or murky, or smells bad despite cleaning, the tank water might be breaking down. The water is probably reacting with the tank plastic. Cheap, old, or low-quality plastic is more prone to heat reactions that can compromise water quality. This can be a big problem because water is vital for health.

4. Overgrowth of Algae or Slime

Although certain algae may develop if the tank is exposed to sunlight, the presence of excessive algae or slime in the tank may be a sign of a weakened tank wall and a lack of proper insulation on the part of the plastic tank. An older plastic tank will often have worn-off protective coatings, and since the tank will be exposed to sunlight, algae and other microbes will develop in the tank.

5. Warping or Deformation of Shape

A plastic water tank should retain its original form even when it is filled with water. Swollen or droopy tanks may be an indicator of low plastic strength to withstand water pressure. This can be caused by exposure to high or low temperatures for an extended period. A plastic water tank should not be exposed to high water pressure since water acts as a compressor to the plastic material.

6. After the Recommended Life Span

Every plastic water storage tank also has a shelf life, which may last for 10 to 15 years, depending upon the standard and usage. If you feel that your water storage tank is old and has some flaws, then it is better to get it replaced rather than spending money on repairing it again and again. Modern water storage tanks come with the latest materials and UV protection.

7. Matters related to cleaning or maintenance

If your plastic water tank features a rough or flakes texture on the interior sides, it means it might harbor dirt and bacteria, making it hard to clean. This is mostly the case when your plastic is decomposing. A tank that is not easy to clean is a big problem concerning hygiene.

8. Higher Repair and Maintenance Costs

If you realize you keep on investing in patching, fitting, or cleaning agents on your tank, it is high time you replaced it. Buying a plastic water tank is cost-effective in the long run since you won’t be investing in constant maintenance anymore.

Choosing the Right Replacement

One of the most preferred and best-rated names for water brands, named Vectus, is targeting the best production and best-quality tests for water tanks with optimal performance adapted for the Indian conditions when one chooses the right water tank keeping longevity and cleanliness factors into consideration.

Share

Locate Us

Registered Office Address
Vectus Polymers Private Limited
262, Jiwaji Nagar, Thatipur, Gwalior, M.P – 474011
Contact : 0751-2232402/4084748
CIN NO. U25202MP2007PLC019781

Corporate Office Address
Vectus Polymers Private Limited
A-143, 12th Floor Sovereign Corporate Towers, Sector 136 Noida, Gautam Buddha Nagar, U.P - 201305
Contact : 0120 - 4753200

© All Rights Reserved Vectus
Powered by ITPL