Sales Enquiry
Name
Address
State
Mobile Number
Email
Enquiry
Enter Shown Code
     
Toll Free Helpline : 1800-120-12345
Products
Home » Products » Astm Cold Water Plumbing Systems

ASTM Cold Water Plumbing System

ASTM Cold Water Plumbing System

Available size:
• SCH 40 : ½"(15 mm) to 4" (100 mm) IPS
• SCH 80 : ½"(15 mm) to 4" (100 mm) IPS
As per ASTM D1785, D2466, D2467
(Nominal Size) Mean Outside Diameter Wall Thickness
Diameter Schedule 40 Schedule 80
mm Inch        
Min Max Min Max Min Max
20 1/2 21.24 21.44 2.77 3.28 3.73 4.24
25 3/4 26.57 26.77 2.87 3.38 3.91 4.42
32 1 33.27 33.53 3.38 3.89 4.55 5.08
40 42.03 42.29 3.56 4.07 4.85 5.43
50 48.11 48.41 3.68 4.19 5.08 5.69
63 2 60.17 60.47 3.91 4.42 5.54 6.20
75 72.84 73.20 5.16 5.77 7.01 7.85
90 3 88.70 89.10 5.49 6.15 7.62 8.53
100 101.40 101.80 5.74 6.42 8.08 9.04
110 4 114.07 114.53 6.02 6.73 8.56 9.58

FITTINGS

  • PIPE CLIP
    PIPE CLIP
  • Available Sizes: ½, ¾, 1
  • CIRCUIT TESTING PLUG
    CIRCUIT TESTING PLUG
  • Available Sizes: ½, ¾, 1
  • BALL VALVE
    BALL VALVE
  • Available Sizes: ½, ¾, 1, 1¼, 1½, 2
  • UNION
    UNION
  • Available Sizes: ½, ¾, 1
  • FEMALE THREADED TEE (METAL INSERT)
    FEMALE THREADED TEE (METAL INSERT)
  • Available Sizes: ½, ¾, 1, ¾ x ½*, Available Sizes: ½, ¾, 1
    1 x ¾*, 1 x ½*
  • FEMALE THREADED JOINT F.T.A. (PLASTIC) (METAL INSERT)
    FEMALE THREADED JOINT F.T.A. (PLASTIC) (METAL INSERT)
  • Available Sizes: ½, ¾, 1, ¾ x ½, 1 x ¾
  • MALE THREADED JOINT (METAL INSERT)
    MALE THREADED JOINT (METAL INSERT)
  • Available Sizes: ½, ¾, 1, ¾ x ½, 1 x ¾
  • FEMALE THREADED 0 90 ELBOW (METAL INSERT)
    FEMALE THREADED 0 90 ELBOW (METAL INSERT)
  • Available Sizes: ½, ¾, 1, ¾ x ½*, Available Sizes: ½, ¾, 1, ¾ x ½, 1 x ¾
    1 x ¾*, 1 x ½
  • F.T.A. (PLASTIC)
    F.T.A. (PLASTIC)
  • Available Sizes: ½, ¾, 1, 1¼, 1½, 2
  • M.T.A. (PLASTIC)
    M.T.A. (PLASTIC)
  • Available Sizes: ½, ¾, 1, 1¼, 1½, 2
  • END CAP
    END CAP
  • Available Sizes: ½, ¾, 1, 1¼, 1½, 2
  • REDUCING BUSH
    REDUCING BUSH
  • Available Sizes: ¾ x ½, 1 x ¾, 1 x ½, 1¼ x 1,
    1½ x 1¼, 1½ x ½, 2 x 1, 2 x 1½, 2 x ½
  • REDUCING TEE
    REDUCING TEE
  • Available Sizes: 2 x ½, 2 x ¾, 2 x 1¼,
    2 x 1½
  • CROSS TEE
    CROSS TEE
  • Available Sizes: ½, ¾, 1
  • EQUAL TEE
    EQUAL TEE
  • Available Sizes: ½, ¾, 1, 1¼, 1½, 2
  • ELBOW 90
    ELBOW 90
  • Available Sizes: ½, ¾, 1, 1¼, 1½, 2
  • COUPLER
    COUPLER
  • Available Sizes: ½, ¾, 1, 1¼, 1½, 2

PIPES

  • THREADED PLUMBING PIPES
    THREADED PLUMBING PIPES
  • Available Sizes: ½, ¾, 1, 1¼, 1½, 2, 2½, 3, 4
  • SOLVENT WELD PIPES
    SOLVENT WELD PIPES
  • Available Sizes: ½, ¾, 1, 1¼, 1½, 2, 2½, 3, 4

ASTM Cold Water Plumbing System

• Easy to install, as can be used with solvent cement for formation of joints or threaded pipe can be used for easy access.
• Cost Effective
• These pipes are free from any toxicity, oders and tastes, which makes it prefect for all kind of cold water blumbing operation in residental buildings.
• Fire resistance, as it requires higher concentration of oxygen in the air.
 
Joining Instructions ( *Pictures to be consider from existing catalog)
 
Solvent Cement Joint
 
• Cut the pipe of required length & clean the end.
• Chamfer the cut edge of the pipe for easy entry.
• Mark the depth of insertion on pipe end.
• Roughen the pipe insertion surface (externally) & socket of the fitting (internally) by using emery paper.
• Apply a thin coat of PVC solvent cement on the roughened surface with a brush.
• Avoid excess solvent cement. Insert the pipe end inside socket fitting fully and turn through 900 for even spreading of solvent cement. Hold the joint for about 3 minutes.
• Cure the joint for 24 hrs. for a proper and permanent joint.
 
For Thread Joining :
 
•Clean the Male & Female threads.
• Apply teflon tape in the direction of the thread tightening.
• Hand-tighten the threads firmly.
• Tighten the joint little more by using pipe wrench. Do not over tighten.
• Use rubber packing to avoid scratches on pipe.